Lumenera Scientific Infinity Camera
User’s Manual Release 3.3
Page 6 Copyright 2004
3
Using the Camera
3.1 Infinity Capture
Infinity Capture is a powerful and flexible yet simple software application for the
Live Preview, Optimization and Capture of digital images from any of the Infinity
cameras.
It is supported by Windows and has a graphical user interface with standard pull
down menus, an icon based toolbar and keyboard commands, which make it
very simple to control the camera and take images.
The following sections describe the usage of the software and explain the various
camera settings and how they relate to the changes viewed in the live and
captured images.
3.2 Launching the Application
To launch Infinity Capture from your Windows Start menu:
or
Select: Programs > Infinity Camera > Infinity Capture.
(If you installed the software at a different location, the above instruction will be
different based on the location you chose.)
Only one camera may be controlled by each instance of Infinity Capture, but
several instances of the application may be run simultaneously. If more than one
camera is detected by the application, a list of cameras and their corresponding
serial numbers is displayed allowing you to select the camera you wish to control.
3.2.1 Main Window
The main window can be seen in Figure 1. When Infinity Capture starts up, the
program’s live preview window also starts. The main window has the toolbar with
the most common program actions available for quick access.
To Next Page
Loading...