Lumenera Scientific Infinity Camera
User’s Manual Release 3.3
Page 2 Copyright 2004
2
Getting Started
2.1 Software Installation
The Infinity High-Speed USB 2.0 camera you have just purchased is designed to
operate out of the box with minimal set-up.
Prior to plugging the camera into the computer, you must first install the
software.
The software can be found on the CD-ROM that shipped with your product.
2.1.1 System Requirements
We recommend that your PC is equipped with one of the following Microsoft
Windows operating systems:
• Windows 2000 (Service Pack 3), or
• Windows XP (Service Pack 1)
• Microprocessor:
¾ Recommended: Pentium® 4, 1.3 GHz or more
¾ Minimum: 600 Mhz
• Memory:
¾ Recommended: 512 Mb of RAM
¾ Minimum: 256 Mbytes of RAM
• USB 2.0 Port.
Note: A USB 2.0 Port is required. The camera will not work
on a standard USB 1.1 port. USB 2.0 cards for desktop and
laptop computers are available as accessories through your
camera distributor or most electronics stores.
To Next Page
Loading...