Lumenera Scientific Infinity Camera
User’s Manual Release 3.3
Page 4 Copyright 2004
camera), detecting an “Infinity USB 2.0 Camera” device. Select Install
the software automatically from the options that are presented to you
and click Next. A warning may appear notifying you that the drivers have
not been digitally signed by Microsoft. Click Continue Anyway to continue
with the driver installation. Then click Finish to complete the installation of
the drivers.
Note: Windows will require you to re-run steps ii & iii each
time you plug the camera into a new USB 2.0 port. You
must have administrator privileges the first time the camera
is used on any given USB 2.0 port. You may wish to repeat
the installation steps at this time for all USB 2.0 ports on
your computer.
iv. Run the application software from your Start menu and enjoy!
2.2 Technical Support
If you have problems installing or using the software, or with general camera
operation, please contact your place of purchase.
To obtain the latest software release and other technical information you may
also visit our technical support website at:
www.lumenera-scientific.com/support.htm
To register for automatic notification of new software releases you may send an
email to: upgrades@lumenera-scientific.com
. You will be notified by email when
free software upgrades are available. Your privacy is important to us. Your
email address will not be used for any other purpose than to notify you of
available upgrades.
2.3 Installed Software
All of the necessary software and device drivers are contained in an installation
program on the CD-ROM that comes with the camera.
The following files are installed when you run the installation program:
Infinity Capture Application: Lumenera Scientific provides a free, easy to use
capture application with all of the features required for basic camera functionality
and image capture.
To Next Page
Loading...