How to control Lumens VC-A50PB device with Codec?
To control the device with Codec: * Confirm that the firmware version is up to date by consulting with the distributor. * Ensure the connection is correct using RS-232/422 Input. * Verify that System Switch DIP 1 and DIP 3 are set correctly.
How to control Lumens Security Camera device with RS-232/RS422?
To control the device with RS-232/RS422: * Ensure the connection is correct using RS-232/422 Input. * Verify that System Switch DIP 1 and DIP 3 are set correctly.
Why is my Lumens Security Camera VC-A50P image severely delayed?
If the VC-A50P image is severely delayed, try using 1080p or 720p 60/50 Hz signals instead of 25/30 Hz signals.
General| Resolution | 1920 x 1080 |
|---|---|
| Pan/Tilt | Yes |
| Video Compression | H.264 / MJPEG |
| Image Sensor | 1/2.8" CMOS |
| Lens Type | Varifocal |
| Tilt Range | 90° |
| Day/Night | Yes |
| Network Interface | RJ45 10/100Mbps |
| Power Supply | DC12V, PoE (802.3af) |
| PoE | Yes (IEEE 802.3af) |
To Next Page
