Lumens VC-A61P User Manual

English - 44
3-1
Multicast Setting
The setting can be configured after Multicast is
enabled
Support
when
NDI|HX is
On
4
MPEG-TS Setting
Set MPEG-TS format
<Remark> The port number must be set in the
range above 1024 with a maximum
value of 9999.
The following port has been used by
the camera. Setting of the port may
not connect correctly
8554、8556、8557、8080、80、81、
9090、23
V
Support
when
NDI|HX is
Off
5
SRT Setting
1. Set the field of SRT and then check the item
to open SRT streaming
After the SRT streaming is opened, it will be
connected automatically upon startup
2. The port number must be set in the range
above 1024 with a maximum value of 9999.
<Remark> The following port has been used by
the camera. Setting of the port may
not connect correctly
8554, 8556, 8557, 8080, 9090, 1935
3. Delay time is for 20 to 8000 microseconds.
The default value is 120 microseconds
V
6
SNTP Setting
Set SNTP Server IP
V
V
7
Port Setting
Set HTTP port. The default Port value is 80
Set HTTPS port. The default Port value is 81
<Remark> The settings can only be modified
when the camera's DHCP function is
turned off
V
V

Lumens VC-A61P Specifications

General

Brand	Lumens
Model	VC-A61P
Category	Security Camera
Language	English