Lumens VC-A71P-HN - Page 39

39
5.2.14 Maintenance
No
Item
Function Descriptions
1
Firmware Update
 Click the link to check the lastest firmware.
 Click [….] to select the firmware file, and click [Upgrade] to update the
firmware
<Remark> Update takes about 2 - 3 minutes
<Remark> Please do not operate or turn off the power of the device during the
update to avoid firmware update failure
2
Factory Reset
Restore the factory default setting
3
System Settings
Save setup parameters, and users can download and upload camera setup
parameters
4
Event Logs
If the camera encounters errors, an error code log will be established
<Remark> When an error code appears, please try to click to make sure
whether the issue has occurred repetitively
5.2.15 Maintenance - Reboot
No
Item
Function Descriptions
1
Reboot
Reboot immediately
2
Disable
Disable the reboot settings
3
Daily reboot
Set the daily reboot time
<Remark> Please go to Settings - Time to complete the SNTP server
synchronization to set daily reboot
4
Timing Reboot
Set the timing reboot time
1
2
3
4
1
2
3
4