26
5.2.4 Setting - System Setting
<Remark> Preview pane is not supported when NDI is on
Set the resolution of the camera, resolutions supported by the camera are as
follows:
3840x2160 59.94 / 50 / 29.97 / 25 fps
1080p 59.94 / 50 / 29.97 / 25
720p 59.94 / 50
1080i 59.94/ 50
<Remark> After switching to the resolution, the camera will restart. Please refresh the
browser
According to the output resolution, you can select HDMI+NDI, HDMI +
Streaming or HDMI + UVC output
<Remark>
When it is set to UVC output, 3840 x 2160 30p or lower resolutions are supported
HDMI+NDI is supported when NDI is on
HDMI + Streaming is supported when NDI is off
Select YUV422 / YUV420 / RGB
<Remark> When it is set to YUV420, 3840 x 2160 60p/ 59.94p/ 50p resolutions are
supported
Set the standard for color gamut Standard Profile/ REC.709/ BT.2020
Set the stream to display “date and time” or “custom content” and to display
location
After the setting has been modified, select this button to apply the setting
To Next Page
Loading...
Need help?
General
