Luowice R8 User Manual

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual
When the Video conversation process finish, please click' Done' and you
can view the MP4 video file in the your album or file manager under the
Convert folder.
2.3.4 Action with Alarm
2.3.4 Action with Alarm
2.3.4 Action with Alarm
2.3.4 Action with Alarm
2.3.4 Action with Alarm
1.1 Operation Environment
Instruction for Operation on PC Client
1
Hardware environment:
a)Pentium IV series, CPU basic frequency not smaller than 2.0G;
b)Memory not smaller than 2G;
c)Hard disk not smaller than 120G;
d)Display resolution not smaller than 1024 x 768.
Software environment:
Windows2000/Windows XP/Windows2003/Windows
Vista/Windows7/Windows8/Windows10
1.2 Default Setting of PC Client
The address to download PC Client for the camera:
http://www.luowice.com/en/R8-download.html
Please download the PC Client (HiP2P Client) and install it on your PC.
The default User Name of the PC Client: admin (cannot be modified).
Password: None (means leaving it blank).
2.3.4 Action with Alarm
2.3.4 Action with Alarm
2.3.4 Action with Alarm
2.3.4 Action with Alarm
2.3.4 Action with Alarm
1.3 PC Client Interface Instruction
When the PC Client has been installed in your PC
successfully, its icon will appear on the desktop as
follows:
0145
R8
PC Client User Manual
Luowice

Luowice R8 Specifications

General

Brand	Luowice
Model	R8
Category	Software
Language	English

Summary

PC Client Operation Instructions

Operation Environment Requirements

Specifies the hardware and software requirements for the PC client.

PC Client Default Setup and Login

Details download, installation, and default login credentials for the PC client.

PC Client Initial Interface Overview

Shows the desktop icon and the first screen displayed after installing the PC client.

PC Client Operations and Configuration

Config Interface Overview

Details the five main categories within the PC client's configuration interface.

Device Management Features

Explains the device management interface and its zones for camera management.

Methods to Add Cameras

Details two methods for adding cameras: via UID input and LAN search.

Device Deletion and Region Classification

Covers steps to delete cameras and classify them into different regions.

Parameter Settings Overview

Introduces the various parameter settings available for camera configuration.

Video Settings

Guides on modifying video settings like resolution, stream type, and bit rate.

Image Settings

Explains how to adjust image quality and other visual parameters.

Audio Settings

Details how to configure audio capture, type, and volume settings.

Alarm Settings Configuration

Describes how to set up sound and external alarms, including linkage options.

Network Settings Configuration

Covers configuration of IP address, subnet mask, gateway, and ports.

SD Card and Recording Settings

Explains settings for recording length, formatting, and managing SD card space.

Timed Capture and Storage

Details how to configure storage location for snapshots taken from live view.

PTZ Control and Preset Points

Covers Pan-Tilt-Zoom (PTZ) controls and setting up preset positions.

Login Information Management

Instructions on changing the user password for the PC client.

System Settings and Restore

Explains how to check system settings or restore the device to factory defaults.

Wi-Fi Configuration

Guides on modifying the camera's Wi-Fi connection settings.

Local Record Management

Details how to enable and configure local recording schedules and storage.

User Management for PC Client

Explains how to add, modify, or delete user accounts for the PC client.

Other System Settings

Covers miscellaneous settings like timeout, log retention, and startup behavior.

Preview Interface and Live View

Describes the live view interface and the various PTZ control icons.

Preset Point Configuration and Management

Details how to set and manage preset points for camera positioning.

Real-Time Live View Features

Explains electronic zoom, intercom, and audio monitoring functions.

Alarm Information Display and Auto Add Devices

Covers alarm status display and the automatic device addition feature.

Video Playback and Backup

Guides on how to playback recorded videos stored locally and backup to computer.

Remote Playback and Video Conversion

Details SD card playback and changing video file formats for compatibility.

Log Management and Interface

Describes how to access and search the camera's operation logs.

Logout and Exit PC Client

Explains how to log out the current user and exit the PC client application.