Lust KEYPAD KP200 - Change Settings (para Menu)

KEYPAD KP200
1 Using the KEYPAD KP200
1-8
1.6 Change settings (PARA menu)
• The parameters in the PARA menu should be grouped into sub-
ject areas according to their functions, in order to provide a
clearer overview (siehe Table 2.2).
• Only the parameters to which the current user level permits
access can be changed (siehe Table 2.3 and Table 2.6).
1. Select PARA menu
2. Select desired subject area
with cursor keys and confirm
with Start/Enter
3. Select desired parameter with
cursor keys. User level
MODE = 3 (or higher) is
required in this example
4. Value is displayed, the last
character flashes. Use the
down key to move to the
next character. With the up
key the flashing character can
be changed. The 5th charac-
ter at the far left indicates pre-
sign (–) = negative.
The last character can be
entered as an exponent.
5. Save new value with start/
enter or abort (without
saving) with stop/return.
PARA
PARA
PARA
PARA
start
enter
start
enter
start
enter
stop
return
stop
return
stop
return
start
enter
PARA
0...9