1 Using the KEYPAD KP200
KEYPAD KP200
1-13
DE
EN
FR
• MOP function (MP): While the drive is running the speed can be
changed online using the cursor keys.
• Password (display PASSW): The CTRL menu can be pass-
word-protected: parameter 367-PSWCT in subject area _36KP.
1.8 Read/write SMARTCARD (CARD menu)
• In this menu inverter settings can be saved to the SMARTCARD
and transferred to other inverter modules.
• In every storage operation all parameters are always saved to
the S
MARTCARD. For read operations, either all parameters or
only parameters from one subject area (siehe Table 2.2) can be
read-in. By means of multiple read operations several subject
areas can be read.
Note: The CARD menu can only be selected when
the drive is not active!
Note: In bus system mode: While the SMARTCARD
is being read or written to, the bus is inactive. Conse-
quently, if the bus watchdog is active the watchdog may
be triggered.
Function Meaning
READ > ALL Read all parameters from S
MARTCARD
READ > _27RS
Read parameters from subject area e.g. _27RS
(reference structure)
WRITE Store all parameters on the S
MARTCARD
LOCK Write-protect the SMARTCARD
UNLOCK Cancel the write protection
Table 2.4 Functions of the CARD menu
To Next Page
Loading...
