2 Parameter list
KEYPAD KP200
2-1
DE
EN
FR
2 Parameter list
Software version V1.30-0
The following list contains all parameters up to user level
01-MODE = 4 in factory setting (152-ASTER = DRV_1).
An actual parameter list with Your personal settings can be printed with
the D
RIVEMANAGER PC user software. You will find more informations on
the parameters in the Application Manual CDA3000 which is available at
http://www.lust-tec.com.
Abbreviations:
R Read level (LE). This is the user level (01-MODE) from
which the parameter is displayed.
W Write level (SE). This is the user level (01-MODE) from
which the parameter could be edited.
Parameters with write level > 4 are not writeable, e. g.
actual value parameters.
G* The factory setting/value range is depending on inverter
module, motor or settings of other parameters.
To Next Page
Loading...
