Lutron Electronics DS-2013SD - LCD Backlight ON;OFF

2) With the " REC " symbol on the display :
a) Press the " RUN Button " ( 3-4, Fig. 1 ) once, the
" REC MAX " symbol along with the maximum value
will appear on the display. Press the " RUN Button"
again the " REC MIN " symbol along with the minimum
value will appear on the display. Press the " RUN Button"
again will show the " REC " symbol only & execute the
memory function continuously.
b) To exit the memory record function, just press the
" RUN " button > 2 seconds at least. The display will
revert to the current reading.
4-5 LCD Backlight ON/OFF
After power ON, the " LCD Backlight " will light
automatically. During the measurement, press the
" POWER Button " ( 3-2, Fig. 1 ) once will turn off the
" LCD Backlight ".
Press the " POWER Button " once again will turn ON the
" LCD Backlight " again.
10