4-5-11 A range Setting ( Current range Setting )
A : When press SHIFT KEY once the symbol " SHIFT1 " will
be disappeared and show as screen 2, at this time press
or to select A range to 20A to 2000A or▲▼
30A to 3000A.
* The setting value should accoding your Clamp type.
* The CP-3000 clamp can set 30A, 300A, 3000A.
* The CP-2000 clamp can set 20A, 200A, 2000A.
* The CP-1201 clamp can set 20A, 200A, 1200A.
* The CP-200 clamp can set 20A, 200A.
* The Other clamp can set 20A, 200A, 2000A, 30
300A, 3000A.
Attention :
The meter's A range ( Current range ) value should
same as the Clamp's current selecting range value.
B : Press SHIFT KEY once again will return to screen 1 then
press to enter next setting function ( A Range ▼→
V range ).
screen 1 ( 4-5-11 )
Folder Name: WTA01 SETUP
File Name: 3P401001.XLS SHIFT 1
REC Date: 2008-11-28 00:03:17
Sampling Time: 2
Delete File: 0 % Decimal: Basic
SD Format: 0 % Clamp Type: CP1201
Use Size: 388 KB ARange: 20A
Free Size: 1946 MB V Range: 200mV
Total Size: 1946 MB RS232 Out Sel:
PT: 1 : 1 V1 I1 P1
CT: 1 : 1 S1 Q1 PF1
Beep: ON Φ1 WH FREQ
Year Month Date Hour Minute Second
2010 11 13 14 37 25
31
To Next Page
Loading...
