4-5-14 Year/Month/Date/Hour/Minute/Second setting
A : When press SHIFT KEY once, the symbol " SHIFT1"
will disappear as screen 2, at this time press or ▲▼
to adjust expect numbers, and press or ▲▼
continuously at least two seconds can skip the
numbers faster.
B : When press SHIFT KEY once, the symbol " SHIFT1"
will appear as screen 1, at this time press ▼
to enter next setting function ( Year Month ).→
C : The settings about ( Month Date ), (Date →→
Hour ), (Hour Minute ), ( Minute Second ) are→→
same as above step A and step B.
D : In this setting function ( Year Minute ), press or→▲
in addition to adjust the numbers, and the setting▼
value will also be saved during the adjusting.
E : In the function of setting " second ", press or ▲▼
to adjust numbers. at this point the number of second
is at a standstill condition and then press setup key
that will save setting value and also start counting
function of " second ".
Folder Name: WTA01 SETUP
File Name: 3P401001.XLS SHIFT 1
REC Date: 2008-11-28 00:03:17
Sampling Time: 2 screen 1
Delete File: 0 % Decimal: Basic ( 4-5-14 )
SD Format: 0 % Clamp Type: CP1201
Use Size: 388 KB A Range: 20A
Free Size: 1946 MB V Range: 200mV
Total Size: 1946 MB RS232 Out Sel:
PT: 1 : 1 V1 I1 P1
CT: 1 : 1 S1 Q1 PF1
Beep: ON Φ 1 WH FREQ
Year Month Date Hour Minute Second
2010 11 13 14 37 25
36
To Next Page
Loading...
