M-Audio FireWire 1814

13 Product Specs
All audio spec measured at 48kHz sample rate, unless otherwise stated:
Line Inputs 1-8 (TS):
Frequency Response +/- 0.1dB, 22Hz to 22kHz
Dynamic Range 105dB, A-weighted
Signal-to-Noise Ratio -105dB, A-weighted
THD+N <0.00281% (-91dB)
Crosstalk -107dB @ 1kHz
Nominal Input Level -10dBV
Maximum Input level +2.1dBV, typical
Input Impedance 10K Ohms, typical
Mic/Inst. Inputs 1-2 (Balanced; at Minimum Gain):
Frequency Response +/- 0.1 dB, 22Hz to 22kHz
Dynamic Range 105dB, A-weighted
Signal-to-Noise Ratio -105dB, A-weighted
THD+N <0.00281% (-91dB)
Crosstalk -105dB @ 1 kHz
Maximum Input level -3.8dBu, typical
Input Impedance inst in: 500K Ohms, typical; mic in: 1.8K Ohms, typical
Adjustable Gain > 40dB
Pad -20dB
Total Gain Range +60dB
Line Outputs 1-4 (TRS):
Frequency Response 192 kHz: +/- 1dB, 22Hz – 80kHz
96kHz: +/- 0.5dB, 22Hz – 40kHz
48 kHz: +/- 0.1dB, 22Hz – 22kHz
Dynamic Range 107dB, A-weighted
Signal-to-Noise Ratio -107dB, A-weighted
THD+N <0.00301% (-90.5 dB)
Crosstalk -106dB @ 1kHz
Nominal Output Level +4dBu balanced, -10dBV unbalanced
Maximum Output Level +10.2dBu balanced, typical; +2.0dBV unbalanced, typical
Output Impedance 150 Ohm
Load Impedance 600 Ohm minimum
Headphone Outputs 1 & 2 (at Maximum Volume; Into 32 Ohm load):
Frequency Response +/- 1dB, 22Hz to 22kHz
Power into Ohms 16 mW into 32 Ohms
THD+N <0.04987% (-66.1 dB)
Signal-to-Noise Ratio -96dB, A-weighted
Max Output Level into 32 Ohms -3.0dBV, typical
Output Impedance 75 Ohm
Load Impedance 32 to 600 Ohms