14 Default Mixer and Output Configuration Settings
mixer faders 0dB
output faders 0dB
output channels assignments “main”
phones 1 & 2 sources 1/2
sw rtn 1/2 & 3/4 routing to buses 1/2 & 3/4
spdif sw rtn hardwired to spdif out
adat rtn bus hardwired to adat output bus
aux send knobs turned all the way down
analog & digital input channels unassigned
pan knobs hard left / right
balance knobs center position <C>
all mixer and output channels mute=off, solo=off and link=off
main level controller assignment “output” fader group (all output channels selected)
To Next Page
Loading...
