MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
1616
1616
16
In this application example 7 – an output Universe is being controlled
by the left console – the requirements for the stand-alone mode are not
fulfilled, and only a restricted Merge mode is available.
If on the left console, you set Universe 1 to LOCAL MERGE (in the
menu TOOLS / DMX CONFIGURATION / DMX INPUT) you will only
have the HTP option for the Merge mode.
Example of use 7
The left console and
the both 2-ports are
within a session
To Next Page
Loading...
