Form # 147083 Issue 01/07
86
UNLOADING & ASSEMBLY
REPOSITION WOBBLE BOX BREATHER
Unless header will be transported on a trailer that
carries headers upright, swap position of breather (B)
and plug (C) at wobble box to position breather in rear
hole.
ADJUSTMENTS AND CHECKS
Perform the final checks and adjustments as listed on
the "Pre-Delivery Checklist" (yellow insert) to ensure
the machine is field-ready. Use the Operator's Manual
for directions.
Place the Operator’s Manual and Parts Catalog in
storage case (A) located under the left end shield.
A
MANUAL STORAGE CASE
B C
REPOSITION WOBBLE BOX BREATHER
To Next Page
Loading...
