MacDon A30-D - Page 33

UNLOADING AND ASSEMBLY
Form 169078 Revision C
33
o. Connect auger/reel pressure and reel/auger
return hoses from header to receptacles on
windrower valve block.
Refer to applicable section below.
I. M100
II. M150
III. M200
IV. M205
M150 WITHOUT REVERSER VALVE
AUGER PRESSURE
REEL/AUGER RETURN
M150 WITH REVERSER VALVE
REEL/AUGER RETURN
AUGER
PRESSURE
M200 WITHOUT REVERSER VALVE
REEL/AUGER RETURN
AUGER PRESSURE
AUGER PRESSURE
REEL/AUGER RETURN
M200 WITH REVERSER VALVE
AUGER PRESSURE
REEL/AUGER RETURN
AUGER/REEL PRESSURE
REEL/AUGER RETURN
REEL/AUGER RETURN
AUGER/REEL PRESSURE