Saw blade jams when pushing
the machine forward
Release switch at once. Remove
the machine from the workpiece
and replace the saw blade
Increased caution when sawing,
higher risk of kickback.
Poor machine guidance (e.g.
due to unsupported manual
guidance)
Saw blade vibrates in the
workpiece
Saw blade not adjusted correctly
Secure workpiece with clamps
Saw blade stops - motor
continues rotating
Saw blade not properly secured
Burn marks at the cut surfaces
Saw blade blunt or unsuitable for
the operation
Long cutting operation without
extraction
Connect the machine to an
external extractor, such as a small
dust extractor
To Next Page
Loading...
