Mafell MT55cc - Product Specifications; Technical Data

MT55cc
01/2022
5
1.1 Identification of the device
The icons listed and explained below can be found on the rating plate or on the product.
Symbol
Explanation
Symbol
Explanation
V
Volt
1, 2, 3, ...
I, II, III, ...
Rotational speed setting
A
Ampere
rpm
Revolutions per minute
Hz
Hertz
ø
Saw blade diameter
W
Watt
~
Alternating current
kg
Kilogram (weight)
Protection class II
min
Minutes (time)
Read operating instructions
s
Seconds (time)
Protective goggles
n
0
Rated speed at no load
Hearing protection
n
Rated speed at normal load
Dust mask
2 Product specifications
2.1 Technical data
Universal motor
120 V~, 60 Hz
Current at normal load
13.5 A
Saw blade speed at no load
2600 to 6200 rpm
Saw blade speed at normal load
2600 to 6200 rpm
Cutting depth
0°: 0 - 57 mm [0 - 2.24 in]
30°: 0 to 46 mm [0 to 1.81 in]
45°: 0 - 35 mm [0 - 1.38 in]
Swiveling saw unit
-1° / 0°– 48°
Saw blade diameter max/min
162/149 mm [6.38/5.87 in]
Saw blade base body thickness
1.2 mm [0.05 in]
Tool cutting width
1.8 mm [0.07 in]
Saw blade mounting hole
20 mm [0.8 in]
Hose connector diameter
35 mm [1.4 in]
Weight without power cord, without parallel
guide fence
4.5 kg [9.92 lbs]
Dimensions (width x length x height)
228 x 365 x 220 mm [8.98 x 14.37 x 8.66 in]