5
English
7. To detach the clip-on I/O module, press the release button
on the module.
Turning On/Off the Receiver
Once you have charged the battery, press the red key (the pow-
er key) on the front of the receiver until the power indicator
turns solid green.
You will first see the receiver’s start-up
screen (see opposite left). Wait for the
progress bar to complete its sequence.
The screen then displays the ProMark3
workspace with its main icons (see op
-
posite right).
There are three categories of programs
behind these icons:
- ProMark3 primary functions: Survey-
ing and Mobile Mapping icons.
For a ProMark3 RTK with the FAST
Survey software option installed and
unlocked, you will also see the FAST Survey icon.
- DGPS Configuration icon, for a quick access to the DGPS
configuration options.
- Settings and Utilities icons giving access to the complete
sets of setup and utility programs.
When you need to turn off ProMark3, simply press the red
key until the screen displays the Shut Down window and then
tap OK.
ProMark3 Workspace
ProMark3 Start-up Screen