EN
19
8. Setting the shock sensor sensitivity and siren.
8.1. Setting the shock sensor sensitivity.
d.
The shock sensor consists of two zones which can be adjusted
according to your needs. Shock Sensor sensitivity can vary from
vehicle to vehicle for many reasons, including where and how it is
mounted, and the size of the vehicle. Some after-installation
adjustments may be necessary to fine tune the sensor. Let
professional installation service do this for you.
1st zone
2nd zone
8.2. Setting the siren soun
In order to increase the volume of the siren, cut the loop of black wire at the base of the siren.
Let professional installation service do this for you.
To Next Page
Loading...
