EasyManua.ls Logo

Magicar M871A - Important Notices and Product Usage; Warranty and Usage Restrictions; System Introduction; MAGICAR M871 A Overview

Magicar M871A
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
EN
1. Important notice
Serial number of remote control is needful for warranty purposes. Make sure there is
one on your remote.
This product is designed only for car security purposes. No other use is permitted.
2. Introduction
MAGICAR M871A is a safety device with highest level of security. Thanks to a 2-way
remote with pager you will be immediately informed about possible car intrusion, as well as
the manner of intrusion even if you are too far from the car to hear the siren.
MAGICAR M871A offers options to enter the valet mode using a 2-digit PIN code and to
disarm the alarm using a 4-digit code entered via RPS sensor.
The biggest advance of the two-way remote control is ability to use the car without a direct
view of the car. All the commands you will order will be confirmed by the remote.
3. Remote control
Technical specification
Frequency
433,92 MHz
Frequency Stability
+/- 2ppm/year
Dimension
86 x 39 x 20 mm
Weight
33,50 g (no battery)
Transmitting output
10 mW
Operating temperature
-15°C to +50°C
Battery Cover Lock
Battery 1,5V (AAA)

Other manuals for Magicar M871A

Related product manuals