www.magicard.com
RIO 2e, TANGO 2e & TANGO +L Printers USER MANUAL
Page 11 of 33
3. Choosing the right Dye-Film Ribbon
Your
Printer
Full colour cards
or monochrome
Ribbon
Choice
Cards
Per
ribbon
Ribbon
Panel
layout
Part Number
Full Colour LC1
350 one side only YMCKO M9005-751
Monochrome:
Black
Red
Blue
Green
Gold
Silver
White
LC3
1000 one side only K
M9005-753
M9005-753-1
M9005-753-2
M9005-753-3
M9005-753-5
M9005-753-6
M9005-753-7
Magicard
Rio 2e & Tango 2e & Tango +L
Black & Overcoat LC6
600 one side only KO M9005-756
Colour front & Black back LC8
300 front & back YMCKOK M9005-758
Magicard
Tango 2e
Duplex
Colour front & color back LC1
175 Front & Back YMCKO M9005-751
Ribbon Panel Layout Key: Y=yellow, M=magenta, C=cyan, K=resin, O=overcoat (No Colour)
• LC1 dye-film is the appropriate choice for colour printing with both Rio 2 and Tango 2 printers.
• LC8 dye-film, for the Tango 2 models only, is more economic when printing in colour on one side and
black on the other.
• LC6/LC3 dye-film - where cost is critical, monochrome printing is a fraction of the cost of colour printing.
The table below is a guide to selecting the best dye-film to use for any intended application.
To Next Page
Loading...
