— User and Installation Manual
3.3
WARNING
Always make sure that the safety address is not activated (FX LED
indicator on the machine is dimmed) when you approach a
machine.
WARNING
Eye contact with ying sparks and hot particles from the machine
can lead to serious eye injury. Always wear eye protection when
you come near a powered machine.
CAUTION
The output pipe heats up during operation and causes burns
when touched. Do not touch the output pipe of an installed or
recently operated machine.
1 Disconnect the machine from the power supply.
2 Unlock and open the lid of the hopper.
NOTICE
Make sure that the hopper interior is dry and free from foreign
material at all times. Do not use the machine when the hopper
interior is wet. Remove any moist and/or clumped powder.
Remove any foreign material.
To Next Page
Loading...