Magicfx SPARXTAR SPARK FX - 1 Meet the MAGICFX SPARXTAR; Main Parts; SPARXTAR Powder

MAGICFX® SPARXTAR — User and Installation Manual 5
1 MEET THE MAGICFX
®
SPARXTAR!
The MAGICFX
®
SPARXTAR is a special eects machine for controlled emission of sparks
into the air.
The machine transports MAGICFX
®
SPARXTAR Powder from the hopper through an
internal heater and blows the resulting sparks upwards through the output pipe.
The maximum continuous duration of the eect is 40 seconds. Aer this period the
eect will stop automatically. With a full hopper a MAGICFX
®
SPARXTAR can deliver
sparks for a total duration of 9 up to 17 minutes (depending on the set eect height).
The MAGICFX
®
SPARXTAR is outtted for operation:
• with DMX and RDM;
• in sequence with multiple machines.
1.1 MAIN PARTS
FX LED INDICATOR
OUTPUT PIPE
DISPLAY AND BUTTONS
POWER INPUT & OUTPUT
(220-250Vac)
SAFETY EYE
DMX INPUT & OUTPUT
(5-POLE)
POWDER HOPPER
Main parts
1.2 SPARXTAR POWDER
The MAGICFX
®
SPARXTAR uses MAGICFX
®
SPARXTAR Powder to create the eect. Fill the
powder hopper of the machine with powder (maximum of two bags).
NOTICE
The powder is packed in vacuum bags. Do not open the bags
until right before use. This will prevent degradation and
malfunctioning of the powder.