MAGICFX® SPARXTAR — User and Installation Manual
1.4 PRODUCT IDENTIFICATION
Type plate
1.5 ACCESSORIES
Code Product
MFX0305 MAGICFX® BASEPLATE II
MFX3103 Twenty Clamp (20kg) M10
SPR00119 Safety Steel
MFX5002 Powder Removal Funnel
Accessories
Please contact MAGIC FX for additional possibilities.
1.6 DMX CONTROL
The MAGICFX
®
SPARXTAR is controlled with 1 safety address and 2 operational
addresses:
DMX Address Address range Control
Safety address 1 - 512 Device enable/disable
Start address 1 - 511 Eect height
Start address + 1 2 - 512 Eect trigger
DMX addresses
The safety address cannot be the same as (one of) the operational address(es).
Operating of these addresses results in the following:
To Next Page
Loading...