Magicfx SPARXTAR SPARK FX - Troubleshooting Guide; Maintenance Recommendations

24 MAGICFX® SPARXTAR — User and Installation Manual
4 TROUBLESHOOTING
In case the display shows one of the following error or alarm codes, act accordingly.
Code Description What to do
007 Fan is not running at the
expected speed
Fan or inlet possibly blocked. Inspect the
output pipe and air inlet and remove any
foreign objects and material that will block
or obscure the output pipe during operation.
120 Temperature safety Temperature reached its maximum allowed
temperature. Let the eect inactive for a
minute.
121 Orientation of device out of
safe bounds
Keep the device within previously described
safe bounds.
Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved
with the instructions as described in this manual.
5 MAINTENANCE
To achieve the maximum service life of the MAGICFX
®
SPARXTAR you must regularly
clean the MAGICFX
®
SPARXTAR and test if it is functioning correctly.
Contact MAGIC FX if the MAGICFX
®
SPARXTAR is not functioning correctly.
DANGER
Do not replace parts yourself; always consult MAGIC FX if
necessary.