12
DOUGH BLADE (FOOD PROCESSING BOWLS)
Place all the ingredients in the bowl. Put
the lid on and turn anticlockwise until it
locks into position.
The dough blade can also be used to stir
chocolate chips, dried fruit, etc., into the
dough without chopping them. Simply
pulse 2 or 3 times.
Press AUTO.
Switch off as soon as the dough forms a
ball or the mixture is sufficiently kneaded.
MIXES and KNEADS unleavened dough
for shortcrust pastry, rich shortcrust
pastry, etc.
MIXES and KNEADS leavened dough for
bread, brioche, etc.
54
Fit the dough blade on the motor shaft.
It needs to be at the bottom of the bowl.
1
Never exceed the quantities recommended on p.7.
Check out our useful hints and tips on p.23.
Use the spatula to scrape any remaining flour off the sides of the bowl.
2 3
Depending on the quantity, it usually takes less than a minute to knead a batch of
dough. Place all ingredients in the bowl and replace the lid before you switch your
appliance on.
For Food Processor only. Refer to p.13 for kneading in your Patissier.
To Next Page
Loading...
Need help?
General
