MAGIMIX Mini Plus - Fitting the Accessories; Egg Whisk; Mini Bowl

8
8
Place the egg whisk directly in the main
bowl on the motor shaft.
Put the lid on, lock it into position and
remove the pusher.
Egg whisk: make sure to assemble the 4
parts correctly.
Check that the metal shaft is correctly
locked.
The small main blade also fits onto the
support and locks into place when rotated
in a slight anti-clockwise direction.
Place the mini blade on the motor shaft in
the mini bowl.
FITTING THE ACCESSORIES
Mini Bowl: fit over the central spindle
inside the large bowl.
1
3
2
3
Place the lid on top of the bowl ensuring
it is completely flat with the feedtube to
the left hand side of the handle and turn
anti-clockwise until it clicks into place.
4
1 2
Please be careful when handling the blades and disc as they are
extremely sharp.
!