FITTING THE ACCESSORIES
To slice: place the disc with its slicing
blade facing upwards.
Lower the support, fitted with a disc, onto
the motor shaft in the centre of the bowl.
Put the lid on and lock into position.
To grate: Place the disc with its grating
blades facing upwards.
Blender
m
ix: for use with the main
blade. For small quantities place it in the
bowl otherwise position it in the lid.
Discs: place the selected disc on
the support, turning it gently in an
anti-clockwise direction.
Please be careful when handling the blades and disc as they are
extremely sharp.
!
7
Stainless steel blade: place the blade
directly in the main bowl, over the motor
shaft.
Put the lid on, and lock into position.
To Next Page
Loading...
Need help?
General
