Magnescale LT20A Series User Manual

(E) 5
LT20A / LT30 Series
3-1. Connecting the cables
• Secure all connecting cables so as to prevent accidental
disconnection.
• Make certain the counter unit’s power is off before
connecting or disconnecting the measuring unit.
3-2. Installing the counter unit
When mounting in a panel
1. Cut out an opening to match the dimensions shown
(Fig. 2).
2. Insert the counter unit into the cut-out opening in the
panel from the front.
3. Attach the supplied counter stopper from the rear.
4. Press in the counter stopper until it touches the panel.
Note
When attaching the counter stopper to the counter unit,
leave enough space (min. 30 mm/1.18") between the top
and bottom. (Fig. 3)
3. Connecting and installating
Fig. 2
Fig. 3
Panel thickness: max. 12/0.47"
Cut-out dimensions
Panel box
Front of counter unit
68 /2.68"
+1.0
+0.4
+0.039"
+0.016"
68 /2.68"
+1.0 +0.4
+0.039"
+0.016"
4-R1 or less
Fig. 1
Counter stopper
(supplied)
Front of counter unit
Counter stopper
(supplied)
30/1.18"

Magnescale LT20A Series Specifications

General

Brand	Magnescale
Model	LT20A Series
Category	Cash Counter
Language	English