Magnetek Flex EX2 series User Manual

Flex EX2 Receiver Select Instruction Manual
August 2018
Page 29 of 39
4.2.5 Infrared Receiver Settings
The IR programmer unit can be used to set the system serial number, channel, type
setting, function relay settings, and many others. Refer to the Flex IR Programmer
Manual or contact Magnetek field service for more details.
Presets:
• All receivers in a system are set to the same serial
number and assigned channel
• Receiver A - Type 01
• Receiver B - Type 02
• Receiver C - Type 04
• Receiver D - Type 08
• Bridge receiver (non-selectable) - Type 00
• Bridge receiver 1 - Type 16
• Bridge receiver 2 - Type 32
• FUNC RLY1 - Normal
• FUNC RLY2 - RS
4.2.6 Fuse Ratings
FUSE # 110 - 120VAC 220 - 240VAC 380 - 400VAC 410 - 460VAC 24VAC
42 &
48VAC
9 - 36VDC
F3 - F10 5.0A 5.0A 5.0A 5.0A 5.0A 5.0A 5.0A
F1 - F2 0.5A 0.5A 0.5A 0.5A 1.0A 1.0A 3.0A

Magnetek Flex EX2 series Specifications

General

Battery Type	3 AA batteries
Enclosure Rating	IP66
Number of Buttons	Up to 12
Power Source	3 AA batteries
Battery Life	Up to 100 hours
Housing Material	Engineered Plastic
Operating Range	Up to 300 ft (91 m)