Magnetek Flex EX2 series User Manual

Flex EX2 Receiver Select Instruction Manual
August 2018
Page 38 of 39
6.4.2 Receiver Status Indications
6.4.3 Receiver Power Indications
6.4.4 Receiver COM Indications
Type Display Type (Green & Red) Indication
1 Fast green blinks Decoding in process
2 Slow green blinks Decoding on standby
3 2 red blinks
Receiver MAIN relays jammed
or defective
4 3 red blinks Decoding processors defective
5 4 red blinks Receiving RF board defective
6 Fast red blinks
Incorrect transmitter serial
number
7 Solid red Receiver low voltage
8 No light displayed Decoding processors defective
9
3 slow red blinks followed by
slow green blinks
STOP button pressed down
Type Display Type (Red) Indication
1 On Power to receiver
2 Off No power to receiver
Type Display Type (Red) Indication
1 On Power to relay board
2 Off No power to relay board

Magnetek Flex EX2 series Specifications

General

Battery Type	3 AA batteries
Enclosure Rating	IP66
Number of Buttons	Up to 12
Power Source	3 AA batteries
Battery Life	Up to 100 hours
Housing Material	Engineered Plastic
Operating Range	Up to 300 ft (91 m)