14-32
© Copyright Mahindra and Mahindra Ltd. 112020
Cruise control enhances your comfort while driving and allows you
to effortlessly maintain the desired lane speed limit. Improper use of
the cruise control can lead to an accident.
Cruise control is designed to operate above a vehicle speed of
35 kmph for all gears except 1st and reverse gears. The cruise
lamp in the instrument cluster functions only if the cruise
control is active.
CCrruuiissee ccoonnttrrooll wwiillll ffuunnccttiioonn oonnllyy uunnddeerr tthhee ffoolllloowwiinngg ccoonnddiittiioonnss::
• The vehicle is cruising above 35 kmph
• Engine RPM above 1200 or above 1500
• Clutch pedal released
• Brake pedal released
• Cruise is activated first time in an ignition cycle by SET + button
• Subsequent cruise engagements can be done by RESUME SET+
buttons in the same ignition cycle
CCrruuiissee ccoonnttrrooll iiss ddeeaaccttiivvaatteedd uunnddeerr tthhee ffoolllloowwiinngg ccoonnddiittiioonnss::
• CRUISE OFF button is pressed
• Brake or clutch pedal depressed
If the vehicle speed exceeds the cruise set speed by 30 kmph by
accelerator pedal intervention
• If vehicle speed is increased by 10 kmph for more than 30 secs.
by pressing the accelerator pedal
When Set+/Set- switch is pressed for more than 12 secs. (In
this case, vehicle will not go into cruise mode in that ignition
cycle. In order to restore the cruise function, switch OFF the
ignition, wait for 30 secs. and switch ON the ignition)
Cruise influencing error not indicated by Check Engine Lamp,
OBD lamp, etc.
1144..1144..11 RREESSUUMMEE BBuuttttoonn
With the help of RESUME, you can opt for the previous set cruising
speed of the vehicle in the same ignition cycle. This is best explained
with the following example:
1. Assume, you have activated cruise mode and set the vehicle
speed at 50 kmph.
2. Due to an obstacle or a sharp turn, you have deactivated the
cruise mode by pressing the brake pedal.
3. Vehicle comes out of the cruise mode.
4. When the road condition is suitable to switch over back to
cruise control mode, press RESUME button once. The system
activates the cruise control mode to the previous cruising
speed of 50 kmph.
5. To resume the previous cruise set speed, the vehicle speed
should be above 35 kmph.
SSTTAARRTTIINNGG AANNDD DDRRIIVVIINNGG TTHHEE VVEEHHIICCLLEE
To Next Page
Loading...
