© Copyright Mahindra and Mahindra Ltd. 112020
14-33
1144..1144..22 CCrruuiissee CCoonnttrrooll AAccttiivvaattiioonn
Drive the vehicle to the desired cruising speed (any value greater
than 35 kmph), press and hold the SET + button until the cruise
lamp in the instrument cluster illuminates.
If cruise is deactivated (e. g. by depressing brake to handle an
intervention in the road etc.) in current driving cycle, reactivate the
Cruise to the last active Cruise Speed by pressing the RESUME
button.
Cruise control may not hold the set speed when you are going up or
down hills, and the vehicle may come out of cruise control. This is
indicated by the cruise lamp going OFF in the instrument cluster.
1144..1144..33 CCrruuiissee CCoonnttrrooll DDee--aaccttiivvaattiioonn
You can cancel cruise control in any of the following ways:
• Press the CRUISE OFF button in the steering wheel
• Press the brake pedal
• Gear selector moved into neutral
• HDC or ESP active
1144..1144..44 SSEETT ++ BBuuttttoonn
SET + button is used to activate cruise control and also to increase
the cruise set speed.
To increase the speed in very small amounts, press the SET +
Button. Each time you press, the cruise set speed increases by
about 2 kmph. When you wish to continuously increase the cruising
speed, press and hold the SET + Button and release when the
desired speed is reached.
1144..1144..55 SSEETT -- BBuuttttoonn
To decrease the speed in small amounts, press the SET - Button.
Each time you press, the cruise set speed decreases by about 2
kmph.
When you wish to continuously decrease the cruising speed, press
and hold the SET- Button. When the desired speed is reached,
release the button.
If switch is pressed for more than 12 secs., the switch is
assumed to be malfunctioning and the cruise functionality
ceases to function in that ignition cycle. To resume functionality,
ignition has to be toggled.
SSTTAARRTTIINNGG AANNDD DDRRIIVVIINNGG TTHHEE VVEEHHIICCLLEE
To Next Page
Loading...
