15-12
© Copyright Mahindra and Mahindra Ltd. 112020
LLooww PPrreessssuurree AAlleerrtt
Low pressure monitoring is to indicate low tyre pressure. Please
note the following points.
• Low pressure alert will be set only when the tyre pressure value
goes to certain values
• Low pressure alert in the main alert screen will pop up once for
driver notification when the alert is set and the vehicle is in
running condition. Otherwise the alert will remain in the
information screen and alert register screen
• If low pressure is observed, respective tyre should be rectified
with cause of low pressure and then fill air
• Once low pressure alert is set with tyre pressure lower than
certain values then the alert shall not be cleared until the
pressure is filled to the placard value
HHiigghh PPrreessssuurree AAlleerrtt
High pressure monitoring is to indicate high pressure alert. Please
note the following points.
• High pressure alert will be set only when the tyre pressure value
goes to certain values
• High pressure alert in the main alert screen will pop up once for
driver notification when the alert is set and the vehicle is in
running condition. Otherwise the alert will remain in the
tiretronics screen
• If high pressure value is observed, air has to be released from
the respective tyre until the pressure reduces to the placard
value
• The vehicle should be driven above 40 kmph for the new
pressure value to be updated and the alert to be cleared
WWHHEEEELLSS AANNDD TTYYRREESS
To Next Page
Loading...
