© Copyright Mahindra and Mahindra Ltd. 112020
15-11
4.
Cut the rubber bulb and attach the TTV tool to the valve.
Remove the valve from the rim by pulling through the rim, or
simply pull through without cutting the bulb
5. Lift the outer tyre bead over the rim using a tyre tool
The valve must be positioned just left of the start position
to avoid sensor damage. Do not touch the sensor with the
tyre tool.
6. Lift the inner tyre bead over the rim using the tyre tool
7. Remove existing valve stem
Starting to mount the tyre from the valve location is a wrong
fitment. Fixing tool/stem may hit the sensor and damage it.
Start from the opposite direction.
1155..66..55 FFuunnccttiioonnaalliittiieess ooff TTiirreettrroonniiccss SSyysstteemm
• Low Pressure Alert
• High Pressure Alert
• High Temperature Alert
• Pressure Leakage Alert
• Spare Tyre Swap
• Sensor Signal Missing (Communication error)
• Tiretronics Sensor Faulty.
WWHHEEEELLSS AANNDD TTYYRREESS
To Next Page
Loading...
