Maico touchTymp MI 26 User Manual

Operation Manual touchTymp MI 26 and MI 36 Version
8511780 Rev. 4
29
30/06/2021
The Light Bar
The light bar function on the probe allows the examiner to view test progression and
final compliance for patient focused operation. It can be set on or off in the Basic
settings menu (see section 5.6.3). If set on, the light bar offers the following
functionalities dependent on the test modus (Table 7).
Table 7 Light Bar Functions 1
PROBE
COLOR
EXPLANATION
2x orange
Tympanometry &
Acoustic Reflex:
Shows result: No Response (NR)
2x green
Tympanometry &
Acoustic Reflex:
Shows result: Pass
2x yellow
Acoustic Reflex:
Stimulus is being given (additionally
the last result is shown)
All colours
Tympanometry:
Lights up (rolling up) dependent on
the values (normative box)
While completing Tympanometry testing the Light Bar will light up indicating the height
of the compliance according to the following Table 8.
Table 8 Light Bar Functions 2
INTERNATIONAL
US
226 Hz
1000 Hz
226 Hz
Lightbar Colors
Range Compliance
Range Compliance
Range Compliance
Value < 0.
3
Value < 0.2
Value < 0.2
3
0.
3
≤ Value < 0.
6
0.2 ≤ Value < 0.4
0.2
3
≤ Value < 0.4
6
0.
6
≤ Value < 1.0
0.4 ≤ Value < 0.6
0.4
6
≤ Value < 0.6
9
1.0 ≤ Value < 1.
3
0.6 ≤ Value < 0.8
0.6
9
≤ Value < 0.9
3
1.
3
≤ Value < 1.
6
0.8 ≤ Value < 1.0
0.9
3
≤ Value < 1.1
6
1.
6
≤ Value
1.0 ≤ Value
1.1
6
≤ Value
NOTE: The indication of Pass/No Response can be set on or off individually for 226 Hz and
1000 Hz for Tympanometry and Acoustic Reflex testing (see section 5.6.8).
The light bar will not show any indication of test result when set off (see section 5.6.3).
However, the Pass/No Response indicators will be shown on the screen or in the diagram.

Maico touchTymp MI 26 Specifications

General

Brand	Maico
Model	touchTymp MI 26
Category	Diagnostic Equipment
Language	English