Maico touchTymp MI 26 - Page 74

Operation Manual touchTymp MI 26 and MI 36 Version
8511780 Rev. 4
73
30/06/2021
• One audiogram: The test screen display one
audiogram where standard audiometric symbols are
plotted within the same graph based on earside,
transducer and level at the time of selecting Store /
NR (Figure 154).
MI26 –One audiogram MI 36 – One audiogram
Figure 154
Two audiogram: The test screen displays two
audiograms where standard audiometric symbols are
plotted based on earside, transducer and level at the time
of selecting Store /NR (Figure 155). Right and Left
graph is placed based on ear Display (see section 5.6.3,
Figure 108).
MI26 –Two audiogram MI 36 – Two audiogram
Figure 155
Figure 156
Symbol set: Selection of country specific symbols to be
plotted on the audiogram displays. Choose between:
Australia, Hong Kong, International, UK, and US
(Figure 156).
Figure 157
Bone lines: Displaying of bone lines when an audiogram
is selected as the Display Type. Choose between: Dash,
Solid or No line (Figure 157)
Figure 158
Store position: Allows the Store button to be placed on
the Right or Left side of the screen for user preference in
operation (Figure 158).
Figure 159
Level position: Change of the level control to swap the
placement of these buttons (Figure 159). Choose between: