4
Please note all (Ref.) refer to the Controls and Functions
mapping guide on Pages 1-2.
Basic Operation
Plug the connector into the back of the system labelled DC 5V
(Ref.13) and the power supply into the mains if not already
charged.
Position the Power Supply switch on the back of the system to
‘ON’ (Ref.12).
Ensure the Antenna (Ref.11) is extended as far as possible so that
you can rotate it, enabling you to get the best possible signal.
The Radio will be in Standby mode showing the time and date.
This will automatically update after the first time you use the
DAB radio.
Press the ‘Power/Mode’ button (Ref.3) to turn on the unit.
It will automatically take you to DAB radio mode or the
previous mode you were using.
To change the mode, press the ‘Power/Mode’ button (Ref.3) to
switch between DAB Radio and FM Radio.
When DAB Radio is activated for the first time it will automatically
start scanning and storing all stations that have a good signal.
To scroll through the stations, use the ‘Prev’ button (Ref.5) or ‘Next’
button (Ref.6). Press ‘Enter’ (Ref.7) to select a station.
To Next Page
Loading...
