EasyManua.ls Logo

MAJORITY CB4A-DAB-WHT - DAB Radio and Set up Preset for DAB Radio

MAJORITY CB4A-DAB-WHT
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions Guide
Instructions Guide
5
Standby
To place the music system in standby mode, press and hold the
‘Power/Modebutton (Ref.3). To turn off fully, switch the button
on the rear of the unit (Ref.12) to off and turn the power off at
the mains. The cord must be out of reach of children.
DAB / DAB+ Radio
Press the ‘Power/Mode button (Ref.3) to switch to DAB Radio.
On first use it will automatically scan all stations and save them.
Fully extend the antenna (Ref.11).
To auto-scan (if the unit hasn’t automatically done so, or shows
no signal) press the ‘Scan button (Ref.4) and then release. This
will start scanning up the frequency band and store all stations
that have a good signal. Please note, if you aren’t in a good DAB
signal area then the signal received may be limited.
The radio will automatically save all the stations that have a
strong signal. After searching has finished it will automatically
play the first station stored.
To listen to all stations that have been stored use the ‘Next
(Ref.6) and ‘Prev (Ref.5) buttons to scroll through the stations.
Press ‘Enter (Ref.7) to confirm your choice.

Related product manuals