4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DDF484
Drilling capacities Steel 13 mm
Wood 38 mm
Fastening capacities Wood screw 10 mm x 90 mm
Machine screw M6
No load speed High (2) 0 - 2,000 min
-1
Low (1) 0 - 500 min
-1
Overall length 172 mm
Rated voltage D.C. 18 V
Net weight 1.5 - 1.8 kg
without notice.
-
Applicable battery cartridge and charger
Charger
residence.
WARNING: Only use the battery cartridges and chargers listed above.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
-
Sound pressure level (L
NOTE: The declared noise emission value(s) has
another.
NOTE: The declared noise emission value(s)
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
Vibration
-
h,D
2
or less
2
NOTE:
measured in accordance with a standard test method
NOTE:
To Next Page
Loading...
