Makita DS4012 Technical Information

CONCEPT AND MAIN APPLICATIONS
Specification
Specification
Model
Power supply cord*
1: m (ft)
No load speed: min.
-1
= rpm
Chuck capacity: mm (")
Drill chuck type
Weight according to
EPTA-Procedure 01/2003*
2: kg (lbs)
Capacities: mm (")
Steel 13 (1/2)
Wood
Reverse switch Yes
36 (1-7/16)
2 - 13 (1/16 - 1/2)
DS4012
Yes
2.5 (8.2)*
1
2.8 (6.2)
Variable speed control by trigger
Double insulation
Yes
Model DS4012 is a 13mm (1/2”) Drill with variable speed control and
reverse rotation, and has been developed based on the current models
DS4010 (with variable speed control, and without reverse function) and
DS4011 (without variable speed control, and with reverse function).
The performance of model DS4012 is equivalent to the current model DS4011.
Keyed
0 - 600
*1 2.0m (6.6ft) for Australia, Brazil
*2 With Top grip
Dimensions: mm (")
Width (W)
Height (H)
83 (3-1/4)
390 (15-3/8)
Length (L) 340 (13-3/8)
Output
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input
Max. Output (W)
110
120
220
230
240
7.2
8.5
3.6
3.5
3.3
50/60
50/60
50/60
50/60
50/60
750
N/A
750
750
750
350
350
350
350
350
550
550
550
550
550
Current (A)
PRODUCT
P 1/ 12
T
ECHNICAL INFORMATION
Model No.
Description
DS4012
13mm (1/2”)Drill
Standard equipment
Note: The standard equipment may vary by country or model variation.
Chuck key
Top grip
Connector plastic case (Type3) (for “J” model only)
Optional accessories
Depth gauge
Keyless drill chuck set
Keyed drill chuck set
Bits
Hole saws
Wrench 9 (for Hole saw)
Angle attachment
Wrench 17 (for Angle attachment)
W
L
H
OFFICIAL USE
for ASC & Sales Shop

Makita DS4012 Specifications

General

Drilling	Yes
Screwdriving	-
Idle speed (max)	600 RPM
Idle speed (min)	0 RPM
Chuck capacity (max)	- mm
Drilling diameter in wood (max)	36 mm
Drilling diameter in steel (max)	13 mm
Amperage	8.5 A
Power source	AC

Weight and Dimensions

Depth	340 mm
Width	83 mm
Height	390 mm
Weight	2800 g