Makita RT0701C User Manual

15 ENGLISH
1
2
► 1. Screwdriver 2. Brush holder cap
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specied
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Straight & groove forming bits
• Edge forming bits
• Laminate trimming bits
• Straight guide assembly
• Trimmer guide assembly
• Trimmer base assembly
• Trimmer base assembly (resin)
• Tilt base assembly
• Plunge base assembly
• Offset base assembly
• Templet guide
• Collet cone 1/4"
• Collet cone 3/8"
• Wrench 13
• Wrench 22
• Dust nozzle set
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com

Makita RT0701C Specifications

General

Variable Speed Control Dial	Yes
Collet Capacity	1/4"
Base Type	Fixed
Power Source	Corded
Horsepower	1.25 HP
Variable Speed	10, 000 - 30, 000 RPM
Soft Start	Yes
Voltage	120V
Net Weight	3.9 lbs
Weight	3.9 lbs
Amperage	6.5 A
Power	1.25 HP
Tool Length	8-3/4"