1. Turn the Wind-up Crank until it
stops
(one turn), and the camera is
ready for the next exposure.
2.
After the fixed number of exposures
has been taken (15 for 120 film,
30
for 220 film), the Shutter Release
Button automatically locks, and the
Wind-up Crank becomes free. At
that time, wind the Crank until the
leader paper is completely wound
onto the Take-up Spool. (By turning
the crank 4 to 5 times after the final
frame of the film comes in sight, the
film will be wound up completely.)
3.
4.
5.
Open the Back Cover, and remove
the Roll Film Insert. The exposure
counter will return to
S
(start)
automatically.
Move the Spool Clip of the Roll Film
Insert outward to remove the film.
Remove the film from the Roll Film
Insert, exercising care that the film
does not loosen, and seal it.
23
To Next Page
Loading...
