1
3. Taking Photographs
first.
Advancing the film
1. Take out the dark slide and release the
shutter. When the shutter is released, the
red
mark will appear in the exposure counter indi-
cating that the film has been exposed.
2. As the shutter is released, simultaneously
the film wind-stop mechanism is automatically
disengaged, and the film can be advanced to
the next frame. When film is advanced one full
frame, the figure in the exposure counter
advances and the red mark will disappear.
Advancing the film and cocking
the shutter
@
Film
advancing
@
Shutter cocking
@
Shutter releasing
However,
either advancing the film or
cocking the shutter can be conducted
The multiple-exposure coupler will prevent
shutter release unless the exposed film
frame is advanced.
A multiple-exposure photographic mode is
an added feature.
Wind the film advance lever in a slow, steady
manner to avoid film advance problems.
Although the film advance lever cannot be
reversed until it is wound up to the initial
70’,
it can be moved in several short, definite
strokes thereafter.
23