21 Multiple Exposure Photography
22 Close-up Photography
Exposure compensation for close-up
photography
When the bellows of the camera is
extended for close-up photography, and dis-
tance between the lens and the
film plane
increases, image brightness on the film plane
decreases, thus requiring an increase in expo-
sure. To adjust the exposure, refer to the
exposure compensation scale on the camera
body.
When a finder with built-in exposure meter
(i.e. PD Prism Finder or PD Magnifying Hood)
is used, exposure compensation is unneces-
sary, since TTL
metering
takes place.
When making exposure compensation,
refer to the exposure compensation scale on
the camera body.
When the multiple exposure lever of the roll
film holder is moved forward, the
multiple-
exposure prevention coupling pin disengages.
In this mode the shutter can be cocked and
released without limit.
l
The multiple exposure lever can be changed
over before or after the shutter is cocked,
and also before or after the shutter is
released for the first multiple exposure
photograph.
. When the multiple exposures are com-
pleted, never fail to return the multiple
exposure lever to its original position; other-
wise, subsequent photos will also be multiple
exposures.
32
To Next Page
Loading...
