26
Trouble
Shooting
Various safety interlocking device are incor-
porated in the Mamiya
RB67
Pro-SD to
elimi-
4. After the shutter was released during
ordi-
nary exposure (not during multiple expo-
nate careless operational mistakes. When the
sures),
did you advance the film?
shutter is not released, or when the lens or the
5. Was the dark slide pulled out?
roll film holder cannot
be removed, do not
Pull out the dark slide.
hastily conclude that this indicates a camera
malfunction. Check the following conditions:
6. Is the revolving adapter turned to the
click
stop
postion?
the numbers in parentheses indicate the page
number in the Instruction Manual that cover
relevant malfucntions.
Turn the adapter until it stops with a click.
(p. 20)
7. Has the slide lock on the revolving adapter
stopped halfway?
Move the slide lock until it stops. (p.4)
Shutter release button cannot
be depressed
1. Is the shutter release button locked?
Turn the shutter release lock ring coun-
terclockwise and align it with the white dot.
(p.13)
2. Is the mirror set?
Set the mirror by pressing the shutter
cock-
ing lever down.
3. Is the roll film holder loaded with film and
has the film
and has the film been advanced to
the first exposure?
Lens cannot be removed
To remove, press the shutter cocking lever
down. Set the mirror and the shutter.
(p.10)
When mounting
the
film holder, won’t
the slide lock move?
While pressing the side lock release lever,
move the slide lock to the left. (p. 14)
Can’t the roll film holder be removed?
After inserting the dark slide, the slide lock
should operate.
40
To Next Page
Loading...
